LED Rear Footwell Light Add-On Kit Tacoma (2016-2023)
Product Description
Add On Already have our front footwell kit? Adding light to the rear seats couldn't be easier! It's a simple plug-and-play installation using the output connector from the passenger-side light bar. The daisy chain wiring design allows multiple bars to be connected on one circuit, so you can add as many as you want! It only takes a few minutes, and the results are phenomenal!
Low Profile At just a little under 3" long and 1/4" thick, these ultra-slim light bars can be installed just about anywhere!
Color Option
Included
- 2X - 21 LED Bar Lights
- 1X - LSE VHB Tape For Smooth Surfaces
- 1X - Velcro Tape for Carpet
- 2X - 8 Foot Extension Wires
- 1X - 4 Foot Extension Wire
- 4X - Zip Ties
Product Features
- Plug n Play wiring with our bulb base adapter
- Made with a thick aluminum circuit board for better reliability and a longer lifespan.
- Black PCB and aluminum housing adds a nice touch and blends better with most interior panels.
- High-quality 3M VHB tape or Velcro. Just clean and prep any smooth or carpeted surface, peel and stick the strip light to install.
- Built-in current limiting resistor and diode protects the strip from reversed polarity installation. If they don't light, flip the wires around.
- No stripping or fussing with wires! Simply daisy chain them together using wire adapters and extensions. DuoTaps are recommended for hardwire installations.
- Color-specific chips that match all other VLEDS LED bulbs.
Fitment Notes
- Fits Toyota Tacoma (2016-2023)
Original: $50.00
-65%$50.00
$17.50More Images
LED Rear Footwell Light Add-On Kit Tacoma (2016-2023)
Product Description
Add On Already have our front footwell kit? Adding light to the rear seats couldn't be easier! It's a simple plug-and-play installation using the output connector from the passenger-side light bar. The daisy chain wiring design allows multiple bars to be connected on one circuit, so you can add as many as you want! It only takes a few minutes, and the results are phenomenal!
Low Profile At just a little under 3" long and 1/4" thick, these ultra-slim light bars can be installed just about anywhere!
Color Option
Included
- 2X - 21 LED Bar Lights
- 1X - LSE VHB Tape For Smooth Surfaces
- 1X - Velcro Tape for Carpet
- 2X - 8 Foot Extension Wires
- 1X - 4 Foot Extension Wire
- 4X - Zip Ties
Product Features
- Plug n Play wiring with our bulb base adapter
- Made with a thick aluminum circuit board for better reliability and a longer lifespan.
- Black PCB and aluminum housing adds a nice touch and blends better with most interior panels.
- High-quality 3M VHB tape or Velcro. Just clean and prep any smooth or carpeted surface, peel and stick the strip light to install.
- Built-in current limiting resistor and diode protects the strip from reversed polarity installation. If they don't light, flip the wires around.
- No stripping or fussing with wires! Simply daisy chain them together using wire adapters and extensions. DuoTaps are recommended for hardwire installations.
- Color-specific chips that match all other VLEDS LED bulbs.
Fitment Notes
- Fits Toyota Tacoma (2016-2023)
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Product Description
Add On Already have our front footwell kit? Adding light to the rear seats couldn't be easier! It's a simple plug-and-play installation using the output connector from the passenger-side light bar. The daisy chain wiring design allows multiple bars to be connected on one circuit, so you can add as many as you want! It only takes a few minutes, and the results are phenomenal!
Low Profile At just a little under 3" long and 1/4" thick, these ultra-slim light bars can be installed just about anywhere!
Color Option
Included
- 2X - 21 LED Bar Lights
- 1X - LSE VHB Tape For Smooth Surfaces
- 1X - Velcro Tape for Carpet
- 2X - 8 Foot Extension Wires
- 1X - 4 Foot Extension Wire
- 4X - Zip Ties
Product Features
- Plug n Play wiring with our bulb base adapter
- Made with a thick aluminum circuit board for better reliability and a longer lifespan.
- Black PCB and aluminum housing adds a nice touch and blends better with most interior panels.
- High-quality 3M VHB tape or Velcro. Just clean and prep any smooth or carpeted surface, peel and stick the strip light to install.
- Built-in current limiting resistor and diode protects the strip from reversed polarity installation. If they don't light, flip the wires around.
- No stripping or fussing with wires! Simply daisy chain them together using wire adapters and extensions. DuoTaps are recommended for hardwire installations.
- Color-specific chips that match all other VLEDS LED bulbs.
Fitment Notes
- Fits Toyota Tacoma (2016-2023)
