Bolt On Track Bar Correction Kit Land Cruiser (2024+) & 4Runner (2025+)
Product Description
Correct rear axle alignment on your lifted Sequoia with the B.O.T.C.K. Bolt-On Track Bar Correction Kit. This kit repositions the rear track bar to restore proper geometry after installing a lift. The result is a more centered rear axle, improved handling, and reduced side-to-side movement—without cutting, welding, or permanent modifications.
Fitment Notes
- Fits all 2024+ Land Cruiser's
- Fits all 2025+ 4Runner's
- How to Pick the Correct B.O.T.C.K. Version
- Park on level ground.
- Measure from the ground to the center of the frame-side track-bar bolt.
- Measure from the ground to the center of the axle-side track-bar bolt.
- Subtract the two measurements to find your bolt-height difference:
- 1.5"–2.99" → Shorty Version (or use the bottom hole on the Standard bracket)
- 3" or higher → Standard Version (use the top hole)
-
Torque spec: 105 ft-lbs on all bolts with lots of blue Loctite (or a little red)
Included
- Front bracket
- Back bracket
- Flag nut
- (1x) M14 x 1.5 x 75mm flange head bolt
- (2x) M14 x 1.5 x 35mm flange head bolt
- (1x) M14 hex nut
- All hardware is zinc coated
Product Features
- Recenters the rear axle after installing a lift
- Improves straight-line stability and overall handling
- Reduces rear-end shift and lateral movement
- Bolt-on installation—no cutting or welding required
- Maintains proper suspension geometry and drivability
Original: $220.00
-65%$220.00
$77.00More Images
Bolt On Track Bar Correction Kit Land Cruiser (2024+) & 4Runner (2025+)
Product Description
Correct rear axle alignment on your lifted Sequoia with the B.O.T.C.K. Bolt-On Track Bar Correction Kit. This kit repositions the rear track bar to restore proper geometry after installing a lift. The result is a more centered rear axle, improved handling, and reduced side-to-side movement—without cutting, welding, or permanent modifications.
Fitment Notes
- Fits all 2024+ Land Cruiser's
- Fits all 2025+ 4Runner's
- How to Pick the Correct B.O.T.C.K. Version
- Park on level ground.
- Measure from the ground to the center of the frame-side track-bar bolt.
- Measure from the ground to the center of the axle-side track-bar bolt.
- Subtract the two measurements to find your bolt-height difference:
- 1.5"–2.99" → Shorty Version (or use the bottom hole on the Standard bracket)
- 3" or higher → Standard Version (use the top hole)
-
Torque spec: 105 ft-lbs on all bolts with lots of blue Loctite (or a little red)
Included
- Front bracket
- Back bracket
- Flag nut
- (1x) M14 x 1.5 x 75mm flange head bolt
- (2x) M14 x 1.5 x 35mm flange head bolt
- (1x) M14 hex nut
- All hardware is zinc coated
Product Features
- Recenters the rear axle after installing a lift
- Improves straight-line stability and overall handling
- Reduces rear-end shift and lateral movement
- Bolt-on installation—no cutting or welding required
- Maintains proper suspension geometry and drivability
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Product Description
Correct rear axle alignment on your lifted Sequoia with the B.O.T.C.K. Bolt-On Track Bar Correction Kit. This kit repositions the rear track bar to restore proper geometry after installing a lift. The result is a more centered rear axle, improved handling, and reduced side-to-side movement—without cutting, welding, or permanent modifications.
Fitment Notes
- Fits all 2024+ Land Cruiser's
- Fits all 2025+ 4Runner's
- How to Pick the Correct B.O.T.C.K. Version
- Park on level ground.
- Measure from the ground to the center of the frame-side track-bar bolt.
- Measure from the ground to the center of the axle-side track-bar bolt.
- Subtract the two measurements to find your bolt-height difference:
- 1.5"–2.99" → Shorty Version (or use the bottom hole on the Standard bracket)
- 3" or higher → Standard Version (use the top hole)
-
Torque spec: 105 ft-lbs on all bolts with lots of blue Loctite (or a little red)
Included
- Front bracket
- Back bracket
- Flag nut
- (1x) M14 x 1.5 x 75mm flange head bolt
- (2x) M14 x 1.5 x 35mm flange head bolt
- (1x) M14 hex nut
- All hardware is zinc coated
Product Features
- Recenters the rear axle after installing a lift
- Improves straight-line stability and overall handling
- Reduces rear-end shift and lateral movement
- Bolt-on installation—no cutting or welding required
- Maintains proper suspension geometry and drivability
